centrifugal centrifugal force
英 [ˌsentrɪˈfjuːɡl ˌsentrɪˈfjuːɡl fɔːs]
美 [senˈtrɪfjəɡl senˈtrɪfjəɡl fɔːrs]
【电】离心力
双语例句
- The juice is extracted by centrifugal force.
果汁是通过离心力榨取的。 - Centrifuge is the use of centrifugal force, separating liquid and solid particles or liquid mixture with the liquid components of the machinery.
离心机是利用离心力，分离液体与固体颗粒或液体与液体的混合物中各组分的机械。 - We are held fast to the ground not by gravity, but by centrifugal force as the Earth rotates.
我们被牢固地固定在地上不是引力而是如地球旋转的离心力。 - A rotating packed bed, which replaces gravity with centrifugal force, was adopted in this study.
新发展的旋转填充床，是藉由气、液在高重力场下，使流动处于较高的加速状态。 - This brake utilizes centrifugal force generated by the rotating disc.
这种制动采用离心力所产生的旋转圆盘。 - Centripetal force and tangential force or centrifugal force and tangential force could be used as a strain analysis method.
用向心力和切向力或离心力和切向力进行胁变分析是可行的。 - Meanwhile, a measure is taken to reduce the action of centrifugal force.
同时提出了减小离心力作用的方法。 - The effects due to vehicle cases with centrifugal force effects included should be compared to the effects due to vehicle cases with no centrifugal force, and the worst case selected.
宜比较含离心力效应的车辆效应情况与不含离心力的车辆效应情况，并宜选择最不利情况。 - Both clutches display slight centrifugal force overcompensation.
两个离合器均会表现出轻微的离心力过度补偿。 - They are used to hold the rotor enwindings during rotation and act against the centrifugal force.
它们被用来在旋转过程中抵消离心力以保持转子的缠绕。 - Many evaporator designs utilize centrifugal force to separate liquid droplets from vapor in cyclone separators.
许多蒸发器利用旋风分离器的离心力使液滴从蒸汽中分离出。 - Superelevation helps to balance the overturning effect due to the centrifugal force and this beneficial effect may be considered.
超高有助于平衡离心力产生的颠覆效应，可考虑这种正面影响。 - A little fun you can have to demonstrate centrifugal force, but you might want to do it outside.
你能证明地心引力的一个小趣事，但你可能想在外面做这件事。 - Centrifuge: Machine that applies a sustained centrifugal force.
离心机：任何应用持续离心力的装置。 - A pump that use centrifugal force to discharge fluid into a pipe.
利用地心引力放水到管中的泵。 - Through analyzing the effect of centrifugal force in strong swirling flow field, a new turbulent model ( k-ε-cf model) to computer power done by centrifugal force in the turbulent pulsation is proposed.
通过分析强旋流场中离心力的作用，提出了考虑湍流脉动中离心力作功的湍流模型（k-ε-cf模型）。 - In the experiment of combined environment, the combination of high-linear-acceleration and vibration comes true by the vibration of vibration table on the centrifugal force field, Control of vibration table on the centrifugal force field differs from the control in the static state environment.
在环境试验中，采用离心力环境下振动台的振动来实现高线加速度与振动的复合。离心力环境下振动台的控制同静态环境下控制有许多不同的地方。 - Design of the Centrifugal Filter Discharging with Centrifugal Force
自卸料式离心过滤机的设计 - The new type mechanical rotator centrifugal precipitator is based on the technology of combination of pneumatic force with centrifugal force. Its application with satisfactory result to treat flue gas from boiler means a great progress in dust removal technology of high-temperature flue gas.
机械转子离心除尘器是一种新型的超强离心耦合气动力分离高温烟气除尘技术，应用于手烧锅炉烟气除尘，意味着机械高温除尘技术取得了很大的进步。 - A method is presented that by boundary layer thickness coefficient k δ and momentum thickness δ 2 the fluid calculation without centrifugal force approaches the fluid calculation with centrifugal force gradually.
提出了结合湍流边界层厚度系数kδ和动量损失厚度δ2由无离心流动计算逐渐逼近离心流动的计算方法。 - The analytical method of linear stability was applied to the natural convection in porous medium considering the action of gravity, centrifugal and Coriolis forces together in a centrifugal force field.
对离心力场下多孔介质中的自然对流进行了线性稳定性分析，考虑了离心力、哥氏力与重力的共同作用。 - The distortion and strength of a high speed and heavy load gear system under the action of an external load and a centrifugal force are studied by using finite element analysis method. The dynamic response and the influence of the centrifugal force of the system are analyzed.
利用有限元理论和数值分析方法，对高速重载齿轮系统在加载和离心力共同作用下的变形和强度进行了分析，研究了离心力对该系统的影响和动态响应。 - A centrifugal impeller system is simplified to a Jeffcott rotor system. The dynamic model of this eccentric centrifugal Impeller-rotor with both nonlinear lateral fluid force and nonlinear oil-film force is built and dimensionless equations of the system are derived.
将叶轮转子系统简化为Jeffcott转子，建立了不平衡离心叶轮转子在非线性横向流体激振力和非线线轴承油膜力作用下的振动模型，并推导了系统的无量纲运动方程。 - Streptococcus Pneumoniae, Neisseria Meningitidis and Haemophilus Influenzae were respectively added to CSF with different leukocytes and protein concentration, and they were centrifuged at different centrifugal force to compare the effect of them on centrifugal force.
将肺炎链球菌，脑膜炎双球菌，流感嗜血杆菌分别加入到蛋白含量不同及白细胞数不同的脑脊液中，在不同离心力下离心，比较脑脊液中蛋白含量及白细胞数量对离心力的影响。 - The centrifugal force unloading centrifuges are widely used in chemical industry, medicine, light industry, food industry, etc, especially suitable for the separation of the cream of sugar refinery each c. Cone drum is the centrifugal force unloading centrifuge.
离心力卸料离心机广泛应用于化工、医药、轻工、食品等行业，特别适用于糖厂对丙膏的分离。 - Whether saturated soil consolidation theory is applicable by changing centrifugal acceleration and the hight of test model under the effect of high centrifugal force field, which is directly related to the reliability of test results in the centrifugal force field.
在较高的离心力场作用下，离心加速度及模型高度的变化对饱和土体固结理论是否适用，这直接关系到离心力场中试验结果的可靠性。 - Then, the Reynolds equation with centrifugal force terms is suggested and calculated here. The effects of centrifugal force on the slurry pressure distributions are obtained.
在此基础上提出并求解了带有离心力项的润滑方程，通过数值模拟得到离心力对抛光液压力分布的影响。 - Centrifugal extruder is a new type of polymer processing machine, used centrifugal force field in polymer processing.
离心式挤出机是一种新型聚合物加工机械，其主要创新点为将离心力场应用于固体输送及增压。 - Centrifuge uses the centrifugal force to separate, precipitate, enrich and purify the material which placed on the rotor. The centrifugal force is produced by the rotor with high-speed rotation.
离心机利用转子的高速旋转产生离心力，对安放于转子内的物质进行分离、沉淀、浓缩和精剂。 - The reliability of the impeller is vital for the high speed centrifugal compressors. In the traditional aerodynamic design process, the simplified centrifugal force verification and a safety factor were introduced to guarantee the reliability.
因此叶轮可靠性对于高速运转的离心压气机而言是至关重要的，在传统的气动设计过程中，对于叶轮可靠性的考虑一般停留在静强度的核算和安全系数层面。